Lighting
Fast emergency lighting repairs across Kent, London and the South East. Keep your building compliant with BS 5266.
A failed emergency light puts your building out of compliance and puts occupants at risk. DCC Electrics provides fast emergency lighting repairs across Kent, London and the South East, restoring your system to full working order and issuing updated certification.
We carry common spare batteries, lamps and control gear to complete most repairs on the first visit.
Emergency lighting failures are often discovered during routine testing or, more worryingly, during an actual power failure. Either way, prompt repair is essential. A non-functioning exit sign, a dead escape route light, or a failed central battery system all represent compliance breaches that must be addressed immediately.
The most common causes of emergency lighting failure are battery degradation, lamp or LED module failure, and charging circuit faults. Over time, batteries lose capacity and may no longer sustain the required three-hour duration. We replace batteries with compatible, high-quality units and test the full discharge cycle to confirm compliance restoration.
For buildings with multiple failures, we offer rapid-response repair teams that can clear a backlog efficiently. We also provide emergency lighting maintenance contracts that include scheduled battery replacement programmes, preventing the bulk of failures before they occur.
Battery replacement and charging fault repairs
Lamp and LED module replacements
Control gear and inverter repairs
Wiring fault diagnosis and repair
Full function test and certification
Same-day and next-day attendance
Get in touch for a free, no-obligation quote. We cover Gravesend, Dartford, Rochester, Chatham, Gillingham and beyond.
Call Now
01474 553200
info@dccelectrics.co.uk
Local Expertise
Kent businesses and public buildings must maintain emergency lighting compliance under the Regulatory Reform (Fire Safety) Order 2005. DCC Electrics has repaired emergency lighting in schools across Medway, care homes in Sittingbourne, hotels in Canterbury, retail centres in Gravesend, and office blocks in Maidstone. We understand the compliance expectations of Kent fire authorities and provide repair documentation that satisfies local enforcement officers.
You May Also Need
Emergency lighting system design, installation and certification across Kent, London and the South East. BS 5266 compliant.
Routine emergency lighting testing and certification across Kent, London and the South East. Monthly and annual BS 5266 compliance.
Commercial Electrical Installation Condition Reports (EICR) across Kent, London and the South East. NICEIC registered, fully certified.
Commercial lighting repair services across Kent, London and the South East. Fast response for faulty office, retail and warehouse lighting.
Our Process
You report failed lights or we discover failures during testing. We gather details about fitting type, failure mode, and building access to dispatch the right engineer and parts.
We test the fitting, battery, charging circuit, and lamp or LED module. For central battery systems we test the inverter, wiring, and distribution to locate the fault.
We replace failed batteries, lamps, LED modules, control gear, or wiring. All replacement parts meet the original fitting specifications and BS 5266 requirements.
We carry out full functional and duration tests, verify automatic activation, and update your logbook. Updated certification confirms your building is compliant again.
Expert Knowledge
Emergency light batteries typically last 3–5 years. We replace degraded batteries with compatible units, test the full discharge cycle, and verify the fitting meets the required backup duration.
Failed LED modules in modern emergency fittings are replaced with manufacturer-approved parts. We test light output, colour temperature, and beam spread after replacement.
For older emergency fittings, we replace failed fluorescent tubes, starter units, and ballasts. Where repair is uneconomical, we advise on upgrading to modern LED emergency lights.
If the battery is not charging properly, we diagnose and repair the charging circuit, transformer, or control board to restore reliable backup power.
For buildings with central battery systems, we repair inverters, distribution wiring, and monitoring panels. We also test and balance the load across all connected emergency circuits.
Failed exit signs are repaired or replaced promptly. We ensure directional arrows, pictograms, and illumination meet BS 5266 visibility requirements.
The DCC Difference
Failed emergency lighting is a compliance breach. We repair quickly and issue updated certification, protecting you from enforcement action and insurance issues.
Our vans carry common batteries, lamps, LED modules, and control gear. Most emergency lighting repairs are completed on the first visit without waiting for parts.
We repair self-contained, central battery, maintained, and non-maintained systems. Our broad expertise means we can fix any emergency lighting technology in your building.
We update your emergency lighting logbook after every repair, ensuring your records are current and compliant for fire officer inspections and insurance audits.
Our maintenance contracts include scheduled battery replacement, cleaning, and testing. Proactive maintenance prevents most failures and avoids emergency repair costs.
With engineers based across Kent, we reach your property quickly. Fast response means less time out of compliance and greater peace of mind for building managers.
Our NICEIC-registered electricians are ready to help. We offer free, no-obligation quotes and fast response times across Kent and the South East. Whether you need advice, a site survey, or immediate work, we are here to get it done safely and professionally.
FAQ
Got a question about this service? Find answers to the most common questions below, or get in touch with our team directly.
We aim to attend within 24 hours for emergency lighting repairs. For buildings with a high number of failures, we can deploy multiple electricians to clear the backlog quickly.
"Pleased with the work done … friendly workmen … worked all the time they were here … firmly recommend."
Gwen Rayiru
9 reviews · 6 months ago
Coverage
Based in Istead Rise, Kent, DCC Electrics provides commercial and domestic electrical services across Kent, London, Essex and the wider South East. Our mobile team can reach most locations within the region quickly.
Not sure if we cover your area?
Call us on 01474 553200 and we'll let you know.
Based in Istead Rise, Kent — covering Kent, London & the South East
Get In Touch
Whether you need an EICR, emergency lighting test, full rewire or ongoing maintenance contract — DCC Electrics is here to help.
Call NowFill in your details and we'll get back to you within 24 hours.